Home

Business

Products

Solution

News

About Us

Home > Steel Pipe> EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes

EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes

Standard:EN10216-2

Material:13CrMo4-5

OD: 10.2-711 mm, WT: 1.6-100 mm.

High Technical method: Normalizing, Quenching and Tempering, Normalizing and Tempering.

Application: used in the power plant boiler tubes, etc

EN 10216-2 13CrMo4-5 Seamless Alloy steel Tube EN 10216-2 13crmo4-5 Material Pipe EN 10216-2 Grade 13CrMo4-5 Tubes EN 10216-2 1.7335 13CrMo4-5 Seamless Steel Tubes 1.7335 13CrMo4-5 Seamless Boiler Steel Tubes EN 10216-2 Seamless steel tubes

Introduction
Parameters
Service

EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes Supplier

EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes are reheated and furnished in a fully annealed, isothermally annealed, or normalised quenched and tempered condition .EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes have a typical chemistry with additions of 0.70-1.15 Chromium and 0.40-0.60 Molybdenum. Bearing a minimum tensile strength of 440 Mpa and maximum tensile strength of 590 MPa, EN 10216-2 Grade 13CrMo4-5 Tubes have a minimum yield strength of 290 MPa.

EN 10216-2 Grade 13CrMo4-5 Tubes Specification covers non-alloy steel tubes, specified room temperature properties. Pipe will be supplied in 5-7 metre random lengths with butt-weld ends and varnished to avoid oxidation of the steel when in storage. All pipes are fully certified and traceable with heat numbers hard stamped onto each random length. GNEE Steel can supply cut lengths; long pieces and even bore from forged, machined bar to satisfy your urgent demand.

Equivalent grades of steel 13CrMo4-5 (1.7335)

EU	USA	Germany	Japan	France	England	Italy
EN	–	DIN,WNr	JIS	AFNOR	BS	UNI
13CrMo4-5	A387Gr.12	13CrMo4-4	SFVAF12	15CD2.05	620	14CrMo3

Specification Parameters

Basic Information

Chemistry Composition of EN 10216-2 13CrMo4-5

C, %	Mn, %	P, %	S, %	Si, %	Cr, %	Mo, %
0.10-0.17	0.40-0.70	0.025 max	0.020 max	0.35 max	0.70-1.15	0.40-0.60

Mechanical properties of EN 10216-2 13CrMo4-5

Steel grade		Upper yield strength or proof strength R eH or Rp 0,2 for Wall Thickness Tmin.				Tensile Strength Rm	Elongation A min. % a
Steel name	Steel number	T ≤ 16	16 < T ≤ 40	40 < T ≤ 60	60 < T ≤ 100		l	t
		MPa *	MPa *	MPa *	MPa *	MPa *
13CrMo4-5	1.7335	290	290	280	–	440 to 590	22	20

Outside Diameter & Tolerance

Hot rolled	Outside Diameter, mm	Tolerance
	OD≤219.1	±1% or ±0.5mm
	OD>219.1	±1% or ±0.5mm
Cold Drawn	Outside Diameter, mm	Tolerance
Cold Drawn	OD≤114	±0.5% or ±0.3mm

Wall thickness & Tolerance

ot rolled	Outside Diameter, mm	WT/OD	Tolerance
	OD≤219.1	WT/OD≤2.5%	±12.5% or ±0.4mm
		2.5%＜WT/OD≤5%
		5%＜WT/OD≤10%
		WT/OD>10%
	OD>219.1	WT/OD≤2.5%	±20%
		2.5%＜WT/OD≤5%	±15%
		5%＜WT/OD≤10%	±12.5%
		WT/OD>10%	±10%
Cold Drawn	Outside Diameter, mm	–	Tolerance
Cold Drawn	OD≤114	–	±10% or ±0.2mm

Service Support

EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes

GNEE GROUP

Business

Products

News

EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes

EN 10216-2 Grade 13CrMo4-5 Alloy Steel Seamless Tubes Supplier

Equivalent grades of steel 13CrMo4-5 (1.7335)

Chemistry Composition of EN 10216-2 13CrMo4-5

Mechanical properties of EN 10216-2 13CrMo4-5

Outside Diameter & Tolerance

Wall thickness & Tolerance