Home > ZhenAn New Materials> Ferro Tungsten 70%
Ferro Tungsten 70% image
  • Ferro Tungsten 70% image 1
  • Ferro Tungsten 70% image 2
  • Ferro Tungsten 70% image 3
  • Ferro Tungsten 70% image 4
  • Ferro Tungsten 70% image 5
  • Ferro Tungsten 70% image 6

Ferro Tungsten 70%

Ferrotungsten is a type of iron alloy composed of tungsten and iron. It is generally used as an alloy additive for steelmaking. It generally has two contents of 70% and 80%. For FeW70, the tungsten content is 70% to 80%. The tungsten content of FeW80 It is 75% to 80%, and other impurities include carbon, phosphorus, sulfur, manganese, silicon, copper and other elements.

  • 请在浏览器中启用JavaScript来完成此表单。
    • Introduction
    • Parameters
    • Service

    Ferrotungsten is a type of iron alloy composed of tungsten and iron. It is generally used as an alloy additive for steelmaking. It generally has two contents of 70% and 80%. For FeW70, the tungsten content is 70% to 80%. The tungsten content of FeW80 is 75% to 80%, and other impurities include carbon, phosphorus, sulfur, manganese, silicon, copper and other elements.

    70% of ferrotungsten is produced through three stages reduction, refining, and iron extraction. In the reduction stage, 75% ferrosilicon and pitch coke or petroleum coke are used for smelting reduction production. In the second stage of refining, silicon, manganese, and other impurities are removed at high temperatures, and then enter the final stage, where the test sample reaches the required chemical composition, and then completes the Production of 70% ferrotungsten. In production, the recovery rate of tungsten can reach 99%.

    There are other ways to produce ferrotungsten. 80% use top-opening electric furnaces, which can be moved on the channel and the upper part of the furnace body is removable. Pure tungsten ore, pitch coke, slag-making materials, and other raw materials are mixed and smelted, then the furnace is pulled out, the upper part of the furnace is removed, the molten iron is condensed, and finally, the blocks are broken into small pieces, and the defective tungsten ferro can be recycled into the melt.

    There is a method called the thermite method to produce ferrotungsten, which uses the heat energy generated when tungsten carbide and aluminum are burned, which can save a lot of electricity. Compared with pure tungsten ore raw materials, tungsten carbide contains fewer impurities.
    Ferrotungsten is commonly used in steelmaking and casting and is widely used in smelting high-speed tool steel, alloy structural steel, magnetic steel, heat-resistant steel, stainless steel, etc. Anyang ZhenAn can supply ferrotungsten in the following packaging: 100kg steel drum packaging, multiple particle sizes to choose from, please contact us if necessary.

    Specification Parameters
    Basic Information
    Grade Chemical composition   %
    W C P S Si Mn Cu As Bi Pb Sb Sn
    The following components are not greater than
    FeW80-A 75.0~85.0 0.1 0.03 0.06 0.5 0.25 0.1 0.06 0.05 0.05 0.05 0.06
    FeW80-B 75.0~85.0 0.3 0.04 0.07 0.7 0.35 0.12 0.08 0.05 0.08
    FeW80-C 75.0~85.0 0.4 0.05 0.08 0.7 0.5 0.15 0.1 0.05 0.08
    FeW70 ≥70.0 0.8 0.06 0.1 1 0.6 0.18 0.1 0.05 0.1
    Specification Parameters

    Tungsten content: 70%-80%
    Appearance: Silver grey metal
    Material: Mn, Si, C, Su, Cu
    Size: 10 ~ 130mm

    Service Support
    Ferro Tungsten 70%

    Q: Are you a factory or a trading company?
    A: We are a factory and trading company.

    Q: How to place an order?
    A: The buyer sends an inquiry → obtains a quotation from Pusheng Steel → order confirmation → the buyer arranges a 30% deposit → starts production after receiving the deposit → strictly inspects during the production process → the buyer arranges the balance payment
    → Packaging → Delivery according to trade terms

    Q: Can I have my logo on the product?
    A: Yes, you can send us your design and we can make your logo.

    Q: Can you arrange delivery?
    Of course, we have permanent freight forwarders who can get the best prices from most shipping companies and provide professional services.

    Q: Can we visit your factory?
    A: Warmly welcome, we will pick you up once we have your schedule.

    Q: Do you have quality control?
    A: Yes, we have obtained BV and SGS certification.

    Q: How long is your delivery time?
    A: Generally it is 7-14 days if the goods are in stock. Or if the goods are not in stock, 25-45 days depending on
    quantity.

    Q: Can we get some samples? Are there any charges?
    A: Yes, we can provide samples for free without paying the shipping cost. If you place an order after confirming the sample, we will refund you the express freight or deduct it from the order amount.

    Q: How do you make our business establish a long-term and good relationship?
    A: 1. We maintain good quality and competitive prices to ensure the interests of our manganese metal manufacturers.
    2. We respect every customer as our friend, no matter where they come from, we sincerely do business and make friends with them.

    Q: What are your payment terms?
    A: 30% T/T deposit, 70% balance paid by T/T or L/C before shipment.