Home

Business

Products

Solution

News

About Us

Home > products> P265GH Pressure Vessel Steel

P265GH Pressure Vessel Steel

Thickness:6mm-80mm

Length: 6000mm~15000mm or as required

Width: 1800mm-3220mm

Application: Oil tank steel plate, High pressure boiler plate, Pressure vessel steel plate

Supplementary Technology: hot rolled, controlled rolling, normalizing, annealed tempering, normalizing+ tempering, hardening + tempering, HIC, SSC, SPWHT, Third Party Test.

Surface: Coated or Shot Blasting and Painting.

Delivery state: Hot Rolled, Cold Rolled

Steel Grade: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10

EN10028-2 P265GH Boiler steel plate EN10028-2 P265GH Pressure Vessel Steel plate EN10028-2 P265GH Storage Tanks Steel plate EN10028-2 P265GH Heat Exchanger Steel Plate

Introduction
Parameters
Service

What is EN 10028-2 P265GH Steel？

EN 10028-2 P265GH,P265GH steel plate,P265GH Boiler plate is one of grade in En10028-2,which is non alloy and alloy steels with specified elevated temperature properties. P265GH boiler steel plate are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.P265GH pressure vessel steel plates are owned the minimum yield point at 265 Mpa strength which are normally used in higher strength situiations for boilers and tanks.P265GH steel also need to be done Normalized.

Characteristics of P265GH Steel

P265GH is a carbon steel known for its excellent weldability, high-temperature resistance, good mechanical strength, and cold-bending performance. It performs well under pressure, making it ideal for boilers, pressure vessels, and heat exchangers. Its durability and resistance to moderate corrosion make it suitable for the power generation, oil, and gas industries. Alternatives like P355GH, 16Mo3, or 13CrMo4-5 may be more appropriate if higher strength or better corrosion resistance is needed.

P265GH Surface Finish

Pickling: Removes surface impurities and oxidation, leaving a clean metal surface.
Galvanizing: Coats the surface with zinc for enhanced corrosion resistance.
Painting: Adds a protective layer and improves resistance to corrosion and wear.
Shot Blasting: Cleans the surface and improves adhesion for coatings.
Polishing: Provides a smooth, reflective finish for aesthetic or functional purposes.
Passivation: Enhances the natural corrosion resistance of the steel by creating a protective oxide layer.

Specification Parameters

Basic Information

EN10028-2 P265GH Boiler steel plate Chemical Composition(%)

Grade	Chemical Composition(%)
Grade	C	Mn≥	Si	P	S
EN10028-2 P265GH	0.2	0.8-1.4	0.4	0.025	0.015

EN10028-2 P265GH Steel plate Mechanical Property

Grade	Mechanical Property
Grade	Tensile Strength(MPa)	Yield Strength(MPa)	% Elongation in 2 in.(50mm) min	Impacting Test Temperature(°C)
EN10028-2 P265GH	390-530	265	22	-20,40,-60